Redirecting you to Developer Center... Click here if you are not automatically redirected.

Choose a Board

Compare the features and functionality of various compatible Windows 10 IoT Core development boards. </h3>

Compatible Windows 10 IoT Core Platforms


Currently, Windows 10 IoT Core is supported on the Raspberry Pi 3, Raspberry Pi 2, MinnowBoard MAX and the Dragonboard 410c. Learn more about the capabilities of each board below, and check out the supported hardware peripherals for each board to decide what board is right for you.

Raspberry Pi 3

The Raspberry Pi 3 is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses an optional standard keyboard and mouse. The Raspberry Pi 3 runs Windows 10 IoT Core.

Raspberry Pi 2

The Raspberry Pi 2 is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses an optional standard keyboard and mouse. The Raspberry Pi 2 runs Windows 10 IoT Core.

MinnowBoard MAX

MinnowBoard MAX is an open hardware embedded board with the Intel Atom E38XX series SOC at its core. MinnowBoard MAX supports Windows 10 IoT Core.

DragonBoard 410c

The DragonBoard™ 410c based on Linaro 96Boards™ specification features the Qualcomm® Snapdragon™ 410 processor, a Quad-core ARM® Cortex™ A53 at up to 1.2GHz clock speed per core, capable of 32-bit and 64-bit operation. WLAN, Bluetooth, and GPS, all packed into a board the size of a credit card.

SOC Broadcom BCM2837 Broadcom BCM2836 Intel Atom (x86) Qualcomm Snap Dragon 410
CPU 900MHz Quad-Core ARM Cortex A53 900MHz Quad-Core ARM Cortex A7 900MHz Quad-Core ARM Cortex A7
Memory 1GB (shared with GPU) 1GB (shared with GPU) 1GB($99 MSRP)
2GB($139 MSRP)
1GB
GPU Broadcom Video Core IV @ 250MHz Broadcom Video Core IV @ 250MHz Intel HD Graphics Qualcomm Adreno 306 @ 400MHz
USB 4 Ports 4 Ports 2 Ports (1 USB 2, 1 USB 3) 4 Ports
Networking Features Onboard Wi-Fi 802.11 b/g/n and Onboard BlueTooth 4.1.
Windows 10 IoT Core supports Wi-Fi and BlueTooth dongles or 10/1000MBit/s Ethernet.
No onboard Wi-Fi or BlueTooth. Supports Wi-Fi and BlueTooth dongles or 10/1000MBit/s Ethernet. 10/100/1000 Ethernet Onboard Wi-Fi 802.11 a/b/g/n
Onboard BlueTooth 4.1
Video Output HDMI, DSI HDMI, DSI Micro HDMI HDMI 1080p HD @ 30 fps
Audio Output Analog via 3.5 mm jack Analog via 3.5 mm jack Digital via HDMI
Analog via MinnowBoard MAX Lure (sold separately)
GPS No No No Yes
Peripherals

17 GPIO pins plus specific functions. HAT ID bus.

Set up your Raspberry Pi 3

17 GPIO pins plus specific functions. HAT ID bus.

Set up your Raspberry Pi 2

8 buffered GPIO pins

Set up your MinnowBoard MAX

12 GPIO pins

Set up your DragonBoard 410c